If there is no COM port on your computer, use the USB to RS232 converter such as CommFront's USB-232-1.

Use a straight-through cable (Half- or Full-Duplex Monitor cable) and a Null-Modem converter to control a DTE device.Ģ) Serial Terminal: Control / debug RS485/RS422 devicesĬonnect an RS232 / RS485 / RS422 converter (CVT-485_422-1) to PC's COM port to control / debug your RS485 / RS422 devices. 1x CBL-Half-1 (Half-duplex RS232 monitor / control cable) or 1x CBL-Full-1A (Full-duplex RS232 monitor / control cable).1x USB-232-1 (USB to single RS232 converter).Use a straight-through cable (Half- or Full-Duplex Monitor cable) to control a DCE device. Virtually any kind of serial device can be controlled from the 232Analyzer, including devices from Industrial SCADA, PLC systems, Commercial Building Automation systems, Pro-Sound Mixers, and AV Matrix Switchers, as well as CCTV cameras and Access Control systems.Ĭlick on the link below for the details of how to:ġ) Serial Port Terminal: Control / debug RS232 devices Also supported are the Virtual COM ports when you are using USB-Serial adapters or Bluetooth Serial Port devices.

With the right type of serial converters, such as CommFront's CVT-485-1, CVT-485_422-1, TTL-232-1 and TT元3-232-1, it is also possible to control other serial devices such as RS-485, RS-422 or TTL, which have different electrical signals but follow the RS-232 communication mechanism. Controlling an RS-232 device is just that simple, no programming or technical background is required. It allows you to control RS-232 devices right from your PC - with various combinations of COM port settings (Port, Baud rate, Data bit, Parity, Stop bit, and Flow control), and the Line state controls (RTS and DTR). Serial port terminal is another important feature available in the 232Analyzer software.

Windows 10 rs232 terminal